art deco noveau jugend table lamp

Seven (7) separate 3D-printed pieces is assembled to this fully functional and stable piece of art deco jugend table lamp.

When 3D-printing: Position the pieces in your printer as in the pictures. NO support. Use a brim to avoid warping. The brim needs to be carefully removed afterwards and the edges need to be trimmed for a smooth surface, preferably with a sharp knife. Layerheight: 0,1 -0,2 mm.

When assembling: Use superglue as described in picture 14. Any excessive superglue should be removed when hardened for a smooth surface before spray painting.

When assembled: If preferably, spray paint it. Glossy or matt (as in my pictures).

When assembled and/if surface treated: 1. Mount the socket cord through the lower base (part 1) and though the upper base (part 2). 2. Mount the E26/E27 socket to the cord. 3. Mount a LED-bulb.

When 3D-printing: Position the pieces in your printer as in the pictures. NO support. Use a brim to avoid warping. The brim needs to be carefully removed afterwards and the edges need to be trimmed for a smooth surface, preferably with a sharp knife. Layerheight: 0,1 -0,2 mm.