Screen housing for BTT TFT35 V3

This screen housing designed for BTT TFT35 V3. 

BTT_TFT35_V3_CASE_V1.stl and BTT_TFT35_V3_CASE_V2.stl  designed with the same mounting dimensions as in  BTT TFT35 V2. It means that you can attach it to any 3D printer with a flat front panel and with the same mounting dimensions as in BTT TFT35 V3.

BTT_TFT35_V3CASE_FOR_ZAV (lerdge screen ).stl  designed for ZAV printers and has lerdge screen mounting dimensions. 

Attention: the screws ISO 7380 M3x6 have to be no longer than six millimeters in length, they are used only for additional fastening of the encoder plate and for a good appearance. 

For this project, I used the model from the website  GrabCAD. Here it is BIGTREETECH TFT35 V3.0 Touch Screen

The installation needs: 

4 screws ISO 7380  M3 16 mm

2 screws ISO 7380 M3 6 mm

4 screws DIN912  M3 length of the screws depends on your printer

4 x M3 hex nuts

If you found this useful, please donate what you think it is worth to my paypal.me/ubivashka20  Help cover the time of design. Thanks, Enjoy!