Duo owl from Duolingo App

Tested:

• on Ultimaker 2 Go.
• with PLA filament,
• on Cura slicer,
• layer height 0,15 mm (exept Duo_pupils.stl - 0,10 mm),
• infill 20%,
• scale 300 %. I recommend to print smaller parts like pupils and legs in sets of 5 so that the heat of the nozzle wont melt little elements. Concider printing them in 0.1 resolution as well.

Print Settings

Printer Brand: Ultimaker

Pinter:  Ultimaker 2 Go

Rafts: Doesn't Matter

Supports:  Yes

Resolution: 0.15 mm

Infill:  20 %

Filament: Orbi-Tech PLA green, white, orange, black 

Notes: 

Personally, after uploading STL's to Cura I scaled all parts by 300 % so the model size is optimal for me.

I recommend to print smaller parts like pupils and legs in sets of 5 so that the heat of the nozzle wont melt little elements.

Post-Printing

I put an effort to be sure all parts fit so You should be able to assemble the model without glue, like LEGO :D . Have fun !!!

... and don't forget to check out my social media:

Youtube https://www.youtube.com/watch?v=6Na8iMA\_yR8&list=PLBYTtsbPo-I9n1KRmHvNYp\_-bhwYlhzlc

Instagram https://www.instagram.com/3d\_challenger/

buy me a coffee https://www.buymeacoffee.com/3d\_challenger

 Duo 3D modeling and printing