Adjustable Pocket Hole Jig with Vise

Summary Adjustable Pocket Hole Jig with Vise For assembly you need the following: 1 Screw rod of aprox 100mm - 112mm long 2 bolt epoxy 2 1/4 copper coupling Printed using PLA with 0.250-0.300mm layer height and 25% infill Instructions For jig adjustment glue with epoxy the thread rod and the nut to the base. For the pocket hole jig with a solder iron place the nut inside the hole and place the two couplings inside the drilling holes to prevent damage of the drill bit to the PLA plastic