RPLiDAR A1 Case

3D model description

RPLiDAR A1 Case

This good looking case was designed to cover all the sensitive parts of A1 LIDAR. The case consists of two parts. Bottom part has mounting holes for the lidar itself as well as for the usb uart converter. It is possible to install the bottom part on profile with two screws. The top part is pure cover. Please see attached figures for more details. I would appreciate any feedback about usage of my design.

Designed and tested with RPLiDAR A1M8 built by SLAMTEC.

3D printing settings

Print without supports. 40% infill; takes 3 to 5 hours print time per piece with Ender 5 pro.