Fidget Key Chain Hammer of Thor

Hammer of thor fidget key chain.

It's a one piece print in place design. Works fine with both 0.12mm and 0.16mm layer height.

Follow Me on

Patreon: www.patreon.com/MakerMan3D

Instagram: www.instagram.com/maker_man3d/

3D PRINTING SETTINGS

Print in Place (No Assembly)

Material: Pla

Layer: 0.12 mm

Nozzle: 0.4 mm

Infill: 10% to 15 %

Supports: Yes (Only Touching Buildplate)