Lithophane stand (Hand holding medieval torch)

You can use whatever you want for the infill density based on your time and requirement. But the lithophane has to be made from white material at 100 percent density and high quality settings for the best results.

Use any online lithophane maker to make your lithophane in the arc mode. The setting I've given is for the height to be 40mm and the angle to be 270 degrees.

If your printer can handle 65 degree overhang for the supports. Then use the model with a cavity to save time. It's basically a cavity in the hand to reduce print time (The original file is 80 percent scaled down to the one with a cavity).