Base support for Ezviz cams

Español:

Hola a todos! Les traigo este modelo de la base donde se instalan las camaras de la marca Ezviz. Este modelo consta de 2 piezas las cuales se la pieza 1_Base.... se imprime 1 sola vez, la pieza 2_Base... se debe de imprimir 3 veces.

Se arma mediante pegamento de cianocrilato.

Espero les sirva.

English:

Hello everyone! I bring you this model of the base where the Ezviz brand cameras are installed. This model consists of 2 pieces, part 1_Base... must be printed only once, part 2_Base... must be printed 3 times.

It is assembled using cyanoacrylate glue.

I hope it helps you.

-------------------------------------------------------------------------------------------------------------------------------------------------------

100% infill

Layer= 0.2mm

Nozzle= 0.4mm

Filaments= ABS, PETG, ASA,PLA.