Description
SummaryA simple, yet elegant dock for the iPhone 6, iPhone 6 Plus or iPhone 6 Plus with 0.3mm case. It has space for the original charge cable and channels for the speaker and microphone. If the charge cable is a bit loose, simply use some (hot)glue. The design is made with Colorfabb Woodfill in mind as seen in the pictures but obviously you can use any material you like. Thanks! BjInstructionsThe one in the pictures is printed with Colorfabb Woodfill at 0.15mm layers. Just print it. No supports or anything fancy.
More from this category
Stand UMAREX Walther PPQ M2
by Charly1964
Stand for UMAREX WALTHER BBQ M2 Pellets cal. 4.5mm PLA , 0,2mm - 220mm x120mm x H138MM
1 ❤️
1 💬
0 ⬇️
$1.0
Loud and compact whistle for your keychain
by Атрикс123
отличный компактный свисток
1 ❤️
0 💬
0 ⬇️
$10.0
Worm gear and chain
by timw
Experiment to build a worm gear and chain using a Form2.
2 ❤️
2 💬
0 ⬇️
Free
Comments (3)
Sign in to leave a comment.
The woodfill looks great for this. Did you have any clogging issues while printing?
Woodfill = hell. I thought I found a way to print it with almost no clogging (http://www.bjornsblog.nl/tips-en-trucs/printing-colorfabb-woodfill-ultimaker-2/) but in the end I think I have 1 successful on every 3 prints. I've quit printing with woodfill for now. Will try again when I have a nozzle with 0.6mm or 0.8mm hole.