Gerzer III tankoped

Legs are on ball joints, turret rotates, gun moves up and down, sideskirts move as well.

PRINTING INSTRUCTIONS: . Insert balls into sockets with side to side rocking action - pliers recommended. Some sanding might be required depending on your printer. 0.2mm layer height.

• Gerzer3 LEG_armor_front.STL      -print 4x 20%infill
• Gerzer3 LEG_armor_back.STL       -print 4x 20%infill
• Gerzer3 LEG_3.STL                               -print 2x 20%infill
• Gerzer3 LEG_2.STL                               -print 2x 20%infill
• Gerzer3 HULL.STL                                -print 1x 20%infill
• Gerzer3 TURRET_socket.STL         -print 1x 20%infill
• Gerzer3 TURRET_gun.STL               -print 1x 20%infill
• Gerzer3 TURRET_ball.STL               -print 1x 40%infill
• Gerzer3 TURRET.STL                          -print 1x 20%infill
• Gerzer3 SKIRT_right.STL                  -print 2x 20%infill, supports needed
• Gerzer3 SKIRT_left.STL                     -print 2x 20%infill, supports needed
• Gerzer3 SKIRT_holder_right.STL -print 1x 40%infill
• Gerzer3 SKIRT_holder_left.STL    -print 1x 40%infill
• Gerzer3 LEG_knee.STL                     -print 1x 20%infill 
• Gerzer3 LEG_foot.STL                      -print 2x 40%infill