Description
SummaryI use these hinges on the enclosure for my MendelMax 2. They use 4mm woodscrews to attach to the MDF or wood and 2 6mm x 90mm bolts and 2 nyloc nuts. Print 2 of each file for a pair of hinges. 8 x 4mm woodscrews. 2 x 6mm x 90mm bolts 2 x 6mm nyloc nuts Released through my company Northern Layers: http://northernlayers.comInstructions8 x 4mm woodscrews. 2 x 6mm x 90mm bolts 2 x 6mm nyloc nuts
More from this category
SDSBTOTO | Modal Receh WD Sultan
by SDSBTOTO
Siapa yang tidak suka bermain togel? Bagi sebagian orang, bermain togel adalah hobi yang menyenan...
Bushing Test
by Zach Frew
Bushings printed in Durable Resin have smooth and low-friction movement over a 9.5...
MKS gLCD 12864 Case
by Patrick Li
MKS gLCD 12864 Case V3, Fix angle of bottom to 90 degree
Post-It Note and Pencil Holder
by LogixNinja08
A MLG post it holder that holds ... you guessed it ... cocain- I mean post its. ...
Nokia 1020 Holder for Intruder C800
SummaryA way to use the GPS and maybe take some videos of the panorama. I hope that all will be o...
Comments (3)
Sign in to leave a comment.
Hi Quentin, you're absolutely right. I've uploaded two files now, one with screwholes and one with the stub. Thanks for the feedback.
Your pictures are different from the files. The male in the picture is only a stub, but the actual download is the same hole pattern as the female.