LT210 5mm lowrider kit

More details at http://www.rcgroups.com/forums...

This is a mod for the LT210 5mm frame.  It allows to lower the quad's center of gravity, improving stability.  It was designed to be extruded in ABS, 0.2mm layers and four-loops walls, but PLA will probably be fine as well.  

Parts: 

- Top plate 

- FPV Camera holder 

- Front bumper 

- Rear bumper 

- Battery plate 

- Xiaomi/Gopro holder

What you will need, other than these 3d-printed parts, the stock LT210 frame and your custom electronics: 

- three 5.5mm hexagonal M3 nuts (better if they're nylocks) 

- three M3 20mm allen cap head hexagonal socket bolts 

- four M3 10mm allen cap head hexagonal socket bolts  

- a fpv camera with the same lens holder as the PZ0420 

- a small vTx, with central antenna connector 

- remove the pins from your flight controller (or buy a "naked version") 

- a small Rx (also consider using a "naked version"). a frsky x4r without the pins occupies almost no space 

- straight connector fpv antenna

Please, share it if you print :)