Bat-quad 210mm by elpet (full printed racing drone)

Summary This is a new designed frame for a FPV racing dron 210 class. The setup suggested is for begginers or experienced pilots. The video attached to the thing is to support begginers to buld a racing dron with a short explanation with some picts and also I can reply to anybody need more info. The batterie recomended for begginers is a 3S Lipo 1400 mAh and 4S 1400 for experts, both with a 40C minim discharge rate, this is a powerfull setup and needs a good lipo. Video How to mount: https://youtu.be/q3gTJFqI2vA Print Settings Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.20 mm Infill: 50% Notes: Top and bottom frame parts were printed using HIPS and middle part in flexible material. The flexible is not ninja or something like that, is a good flexible material more rigid. No support needed and inkfill about 50%. Post-Printing List of parts needed List of parts needed: Motor: http://goo.gl/bsUcqc ESC: http://goo.gl/b5Z6ej Main controller: http://goo.gl/PXHgu4 UBEC: http://goo.gl/5Fwa5X RECEIVER: http://goo.gl/wdh9Jb Propellers: http://goo.gl/gyVrjV