Home > Designs > Toys + Games > Scale 1/10 petrol generator

Scale 1/10 petrol generator

Hi, my name is Jiri and I am great fan of 3D printing. Now, I have sufficient experience with 3D ...

$1.0

Sign In to Download

30 Likes

0 Downloads

11 Comments

Category: Toys + Games

License: custom

Tags

Files Included:

File ID: 946591 (Unknown size)
File ID: 1031526 (Unknown size)
File ID: 1031525 (Unknown size)

Description

This is a scale petrol generator for your RC car/garage equipment.

Update:

I added a split model to try printing separately.

I made it with 0.35 nozzle, two perimeters, 10% infill, bottom 3, top 5 layers. Support is needed. Not easy to remove, if you use automatical support. You have to try insert it manualy.

Comments (11)

Sign in to leave a comment.

steve_dutton about 8 years ago

thanks again for your support its appreciated

steve_dutton about 8 years ago

Hi sorry not got back sooner been very buisy :( re downloaded will give a try and get back to you

steve_dutton about 8 years ago

i have cooler fan on so would not be an issue for me :) its mainly frame i am having issues with rest prints fine but frame just breaks very easy

Gekon3D about 8 years ago

OK. I upload it separately and send you .stl files.

steve_dutton about 8 years ago

hi thanks :) ill give that a try as not having much luck could files be provided seperate as might be easier to print frame seperate to rest ?

Gekon3D about 8 years ago

I try to print the frame separately. The print speed was very low, becouse slow cooling. So the printing time is better to print it together.

steve_dutton about 8 years ago

hi can you please tell me best way to print this ? does it need supports ect as i expected it in seperate parts ?

Gekon3D about 8 years ago

Hi, I made it with 0.35 nozzle, two perimeters, 10% infill, bottom 3, top 5 layers. Support is needed. Not easy to remove, if you use automatical support. You have to try insert it manualy.