Hjalzer tankoped

Screw tightening ball joint articulation,  turret rotates, gun moves up and down, sideskirts move as well. Prints, sand, paint.  Tested with 0.2mm and 0.1mm layer height and at least 20% infill. 

You also need 6x  M2.5x8 and 1xM2.5x12 socket head bolts and nuts and some wire 1mm in diameter (e.g.: paperclips).  

Video: YouTube instructions:

Hjalzer LEG_lower_left_bolt_armor.STL   -print1x and print1x mirrored,  supports integrated in model 

Hjalzer LEG_lower_left__nut_armor.STL -print1x and print1x mirrored, supports integrated in model 

Hjalzer HULL_armor_front.STL                    -print1x,  supports needed 

Hjalzer HULL_armor_back.STL                     -print1x,  supports needed       

Hjalzer HIP_armor.STL                                      -print1x and print1x mirrored, no supports 

Hjalzer TURRET_armor.STL                             -print1x,  supports needed 

Hjalzer LEG_upper_left_nut_armor.STL  -print1x and print1x mirrored,  supports integrated in model 

Hjalzer LEG_upper_left_bolt_armor.STL -print1x and print1x mirrored, supports integrated in model 

Hjalzer LEG_upper_left_nut.STL                 -print1x and print1x mirrored,  no supports 

Hjalzer LEG_upper_left_bolt.STL               -print1x and print1x mirrored,  no supports  

Hjalzer LEG_lower_left_nut.STL                 -print1x and print1x mirrored,  no supports  

Hjalzer LEG_lower_left_bolt.STL                -print1x and print1x mirrored,  no supports  

Hjalzer HULL.STL                                                -print1x,  no supports  

Hjalzer HIP_ball.STL                                          -print2x,  no supports  

Hjalzer GUN_barrel.STL                                  -print1x,  supports integrated in model 

Hjalzer GUN_ball.STL                                       -print1x,   supports needed 

Hjalzer FOOT.STL                                               -print2x,  no supports  

Hjalzer TURRET_clevis_nut.STL                 -print1x,  no supports  

Hjalzer TURRET_clevis_bolt.STL               -print1x,  no supports  

Hjalzer TURRET_ball.STL                               -print1x,  no supports  

Hjalzer TURRET.STL                                         -print1x,  no supports  

Hjalzer RANGEFINDER_left.STL              -print1x and print1x mirrored,  no supports