Woolly Mammoth Skeleton

by rowiac

Free Download
22 Likes
0 Downloads
2 Comments

Category: Other

License: commercial

Tags

Files Included:

  • File ID: 1066293 (Unknown size)
  • File ID: 1066302 (Unknown size)
  • File ID: 1066300 (Unknown size)
  • File ID: 1066295 (Unknown size)
  • File ID: 1066296 (Unknown size)
  • File ID: 1066289 (Unknown size)
  • File ID: 1066290 (Unknown size)
  • File ID: 1066292 (Unknown size)
  • File ID: 1066294 (Unknown size)
  • File ID: 1066291 (Unknown size)
  • File ID: 1066297 (Unknown size)
  • File ID: 1066298 (Unknown size)
  • File ID: 1066301 (Unknown size)
  • File ID: 1066288 (Unknown size)
  • File ID: 1066299 (Unknown size)

Description

Summary UPDATE 15-FEB-2017: I updated the two base parts to the correct versions with holes for the feet pins. See "WMammoth_Base1_v3.stl" and "WMammoth_Base2_v3.stl". UPDATE 26-DEC-2016: I updated the four "feet" models to the correct v3 version. The previous ones were missing the connector pins to snap into the base parts. I also updated the pelvis-spine-skull pins model to be a smaller file size, but you will need to print three of them, hence the "x3" in the file name.. The source file for this model is the 3D scan of a woolly mammoth skeleton from the Smithsonian Institution National Museum of Natural History site at: http://www.3d.si.edu The scale of the .STL files is 1:10. I separated the original model into printable pieces and added snap together features to make it easier to assemble. I also added a two-piece to make the assembled model stand properly and improve strength. The model in the pictures did not have snap features so gluing it together was difficult. I have not tested all of the snap fits, so please let me know of any issues if you build it. The model in the photos was printed at 75% scale to fit the 205mm square bed of my printer. This makes the final scale of the model in the pictures 1:13. The height of the assembled model is approximately 350mm (13.8"), or at the 75% scale to fit most printers the height is approximately 260mm (10.3").. Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: Doesn't Matter Supports: Yes Resolution: 0.15mm Infill: 10%

Comments (2)

Sign in to leave a comment.

Crystanubis over 7 years ago

Nice work and attention to detail.