Tesla Model 3(d print)

Free Download
13 Likes
0 Downloads
2 Comments

Category: Toys + Games

License: commercial

Files Included:

  • File ID: 1163219 (Unknown size)
  • File ID: 1163209 (Unknown size)
  • File ID: 1163206 (Unknown size)
  • File ID: 1163212 (Unknown size)
  • File ID: 1163216 (Unknown size)
  • File ID: 1163210 (Unknown size)
  • File ID: 1163207 (Unknown size)
  • File ID: 1163215 (Unknown size)
  • File ID: 1163213 (Unknown size)
  • File ID: 1163217 (Unknown size)
  • File ID: 1163220 (Unknown size)
  • File ID: 1163222 (Unknown size)
  • File ID: 1163223 (Unknown size)
  • File ID: 1163225 (Unknown size)
  • File ID: 1163226 (Unknown size)
  • File ID: 1163228 (Unknown size)
  • File ID: 1163229 (Unknown size)
  • File ID: 1163230 (Unknown size)
  • File ID: 1163204 (Unknown size)
  • File ID: 1163205 (Unknown size)
  • File ID: 1163208 (Unknown size)
  • File ID: 1163211 (Unknown size)
  • File ID: 1163214 (Unknown size)
  • File ID: 1163218 (Unknown size)
  • File ID: 1163221 (Unknown size)
  • File ID: 1163224 (Unknown size)
  • File ID: 1163227 (Unknown size)
  • File ID: 1163231 (Unknown size)

Description

Roughly based on Daniel Noree's amazing OpenRC F1 platform, this is a 1:18 scale Tesla Model 3 RC car.

Some parts are still a work in progress (right rear axel holder/motor mount may need tweaking, battery clip could be adjusted for individual battery packs, clips to snap the body together might need to be scaled, etc). Print at your own risk.

The same bearing set can be used from the OpenRC F1 car (found here http://www.fasteddybearings.co...),  as well as the same M3 screws (no need for nuts). My electronics were taken from another 1:18 scale car I had laying around. But I imagine it should fit any standard 1:18 brushless motor/ESC, micro servo, rx and 2S LiPo.

Parts generally printed in PLA at .2mm layer height, varying infill, and plenty of support material. Tires can be printed from TPU.

Enjoy!

Comments (2)

Sign in to leave a comment.

Zdenek over 7 years ago

Is it possible, that the stl file from the front body is broken?