Description
Summary This puzzle was my entry for the 2014 IPP Puzzle Design Competition. http://www.johnrausch.com/Desi... It is an interlocking 5x5x5 cube which is 99% printable without support. Only the short tab on the ring piece needs support turned on. http://puzzlewillbeplayed.com/... If you like this puzzle perhaps you would consider purchasing my latest and best design from here https://pinshape.com/items/426...
Print Settings Printer: Mendel90 Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 25 Notes: A nice easy print that only needs support for one of the pieces. Post-Printing The puzzle is not easy to solve as it requires rotations. I have included the solution document here, but please feel free to try and solve it on your own first if you feel up to the challenge. How I Designed This this puzzle was designed using Live Cubes and then replicated in Burr Tools. The STL files were exported from Burr Tools with cube size 10 mm, bevel 1 mm and offset 0.07 mm.
More from this category
Horloge 24 h Bricoloup
Summary Petite Horloge de 200/200 fichier stl corriger 0/24h
Palette PTFE Tube Holder MK2S
by malcinator
Summary This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/48rs9...
Kossel XL buildplate tabs (250mm glass)
by Oeve
Summary Made these mounts so was able to place a heat reflector under need the heated build plate...
JG Aurora A3 Stable Feet
by CdRsKuLL
Summary A very simple mod to try and improve the print quality of the JG Aurora by making it more...
Hictop Prusa i3 X_Carriage mk3 for E3Dv6 LJ12A3
Summary New X carriage version, to support a LJ12A3-4-Z/BX sensor. This moves the sensor 17mm aw...
Comments (3)
Sign in to leave a comment.
i think so
My first puzzle, very nice design...amazingly complex for just 7 pieces. Might have been my printer, but I did have to sand the large flat side of the last piece in your pictures above, the first step unassembling was too tight.