Description
Summary
This is a box for the C64 sd2iec LCD version as found on:http://www.retro-compi.de/index.php/commodore-projekte/sd2iec
Feel free to customize it to your needs.
For printing, support is needed.
There are 2 versions of the bottom plate, one with a retainer for the circuit board, the other one without. In my case the retainer wasn't needed as the board fits snug into the case.
More from this category
BLTouch Mount for Wanhao D6.
Summary BLTouch Mount for Wanhao D6. Fits over Heat break Fan. Print upside down.
2 ❤️
1 💬
0 ⬇️
Free
Multi-size Spool Tri-Adapter Roller Axle
by arcmatt
Summary ... I give you the Tri-Adapter Axle. I started by measuring the inside diameter of the sp...
0 ❤️
1 💬
0 ⬇️
Free
Gears keychain - porte clés engrenages
by NOP21
Summary Apprendre en s'amusant Petit système d'engrenages. droit et hélicoïdal facile à imprimer ...
10 ❤️
4 💬
0 ⬇️
Free
Olympiakos
Summary Sign of Greek Team Olympiakos. https://en.wikipedia.org/wiki/Olympiacos_F.C. Is not print...
1 ❤️
1 💬
0 ⬇️
Free
Small Halloween Skull Toy
Summary This is a scan of a small styrofoam halloween skull I found and scanned with a NextEngine...
7 ❤️
1 💬
0 ⬇️
Free
Comments (7)
Sign in to leave a comment.
You’re welcome
if you make the slide opening large enough so the metal part of the sd slot can slide through it you can get it fit easily. do NOT cut the reset button
Will not do that. I can't slide the SD slot because the reset hit inside the case. What I did was cut the the border inside the case to slide the SD slot. It worked. Thanks for the model.
There is a tip to fit this on the SD2IEC? The hardest part is the insert the SD connector on the case cause the reset button is near.
can you exactly state your issue? you should insert the sd-slot side first and then turn the board into the case. Should be self explanatory...