Life size baby T-rex skeleton - Part 10/10

by Inhuman_Species

I'm a digital sculptor / 3D modeler based in Belgium. I particularly appreciate the organic model...

$5.0
12 Likes
0 Downloads
2 Comments

Category: People + Creatures

License: all_rights_reserved

Files Included:

  • File ID: 1580824 (Unknown size)
  • File ID: 1580817 (Unknown size)
  • File ID: 1580825 (Unknown size)
  • File ID: 1580818 (Unknown size)
  • File ID: 1580805 (Unknown size)
  • File ID: 1580819 (Unknown size)
  • File ID: 1580826 (Unknown size)
  • File ID: 1580806 (Unknown size)
  • File ID: 1580821 (Unknown size)
  • File ID: 1580827 (Unknown size)
  • File ID: 1580822 (Unknown size)
  • File ID: 1580807 (Unknown size)
  • File ID: 1580823 (Unknown size)
  • File ID: 1580828 (Unknown size)
  • File ID: 1580808 (Unknown size)
  • File ID: 1580820 (Unknown size)
  • File ID: 1580809 (Unknown size)
  • File ID: 1580810 (Unknown size)
  • File ID: 1580811 (Unknown size)
  • File ID: 1580812 (Unknown size)
  • File ID: 1580813 (Unknown size)
  • File ID: 1580814 (Unknown size)
  • File ID: 1580815 (Unknown size)
  • File ID: 1580816 (Unknown size)
  • File ID: 1580831 (Unknown size)
  • File ID: 1580830 (Unknown size)
  • File ID: 1580833 (Unknown size)
  • File ID: 1580835 (Unknown size)
  • File ID: 1580832 (Unknown size)
  • File ID: 1580837 (Unknown size)
  • File ID: 1580834 (Unknown size)
  • File ID: 1580836 (Unknown size)
  • File ID: 1580829 (Unknown size)

Description

Purchasing is disabled on Pinshape. If you would like to buy one of my life-size dinosaur models, please contact me: inhuman.species@gmail.com

Here is Elby: little black beauty Part 10/10  :  Cervical vertebrae

Life size baby T-rex skeleton (2 years old).  A complex and complete fossil skeleton.  Sculpted with Zbrush and based on Chomper and Trix scans/pictures.

The size of the skeleton (in this pose)  : Lenght = +- 165cm.  Height = +- 100cm. 

All bones can be printed in a 20cm x 20cm x 20cm build volume.

Total printing time : +- 539h

Nozzle : 0,4mm and 0,6mm

Layer : 0,1mm

Speed: 40 - 50 mm/s (20mm/s to print the teeth)

Infill: Skull: 0%, body: 10%, tail: 30%

Support: yes

The PDF for assembly :  https://www.dropbox.com/s/8f7b...

Contact: inhuman.species@gmail.com

Comments (2)

Sign in to leave a comment.

dandi1511 over 4 years ago

Hello can I ask about the spacing between the three weight support rods, im done with the prints and have the hole model in 4 parts now, just need to paint it now and put it together