Description
3D Printable steering wheel modelled off of a Ferrari 488 GT3, including a Quick Release system with an adapter plate for the Logitech G27 steering wheel.
Additional hardware needed to complete the model:
8x M3x30mm Socket Head Screws
4x M3x10mm Socket Head Screws
12x M3 Hex Nut
6x M8x80mm Flat Head Screws
6x M8 Hex Nut
4x 80x50mm Neodinium Magnets
1x USB Joystick Board (https://www.amazon.de/gp/product/B01CFRYE16)
2x KW10 125V 1A 3 Terminal 13mm Micro Lever Switch (https://www.amazon.de/Hatime-Hinge-10PCS-Momentary-Switch/dp/B07PDDH2RL)
12x On-Off Push Button (https://www.amazon.de/gp/product/B07DJ8QMB1)
More from this category
Fidget spinner bow tie style
by 3deyedoc
I had a request for a bow tie shaped spinner and this was the result. I was able to print this on...
ORGANIZ3D tm Splendor Full Box
The Splendor Full Box From the ORGANIZ3D tm Brand, created by HOCHEFAB 3D / Crazy-Games. The pic...
Strix Screech Hero 8, 20॰ Mount
by Br8knitOFF
TPU, 80% infill, color of your choice.
Dubai Call Girls Service 0525382202 Indian Call Girls in Dubai
by voyal73886
Dubai Call Girls Service 0525382202 Ind
Comments (3)
Sign in to leave a comment.
.
I tried to buy it, but it seems to have some problems.
I think you should make a hole on the backplate and front pcb box for the cable wiring on pcb.
Spacers should also be in place for 5mm screws that pass through the front and back plates.
Otherwise, the front plate will be broken when tightening the screws...
Anyway, I like the design of the steering wheel very much.