Home > Designs > Miniatures > Boeing 777-200, scale 1:1000

Boeing 777-200, scale 1:1000

I made a mini airplane model, please let me know if you have any input, thanks for dropping by.

$0.5

4 Likes

0 Downloads

1 Comments

Category: Miniatures

License: commercial

3D MODEL DESCRIPTION

My favorite slicing software is Cura, I will explain the printing process to just assembling:

import from file number 1 to 6 at a time, specifically number 1 make the infill to 100% and the other is 10%.

print number 7 which is multiplied to 5 times.

print number 8 which is multiplied to 3 times.

clean the print, try first before gluing it.

cut the parts as shown in the picture above.

to adjust the size of the rear wheel using sandpaper.

then the assembly sequence is in the black-and-white picture attachment.

Hopefully the above explanation helps you, feel free if you have questions and suggestions, thank you.

3D PRINTING SETTINGS

Speed: 15-30mm/s Travel: 120mm/s Material: PLA (210°C hotend, 55°C heatbed) Brim: 3mm (Outside) Draftshield: 4mm (Full) - all landing gears

No comments yet. Be the first to comment!