Falcon s 3d Printable Plane

$3.0
3 Likes
0 Downloads
1 Comments

Category: Toys + Games

License: commercial

Files Included:

  • File ID: 1613932 (Unknown size)
  • File ID: 1613942 (Unknown size)
  • File ID: 1613924 (Unknown size)
  • File ID: 1613919 (Unknown size)
  • File ID: 1613920 (Unknown size)
  • File ID: 1613927 (Unknown size)
  • File ID: 1613925 (Unknown size)
  • File ID: 1613921 (Unknown size)
  • File ID: 1613922 (Unknown size)
  • File ID: 1613929 (Unknown size)
  • File ID: 1613928 (Unknown size)
  • File ID: 1613926 (Unknown size)
  • File ID: 1613923 (Unknown size)
  • File ID: 1613916 (Unknown size)
  • File ID: 1613918 (Unknown size)
  • File ID: 1613937 (Unknown size)
  • File ID: 1613943 (Unknown size)
  • File ID: 1613934 (Unknown size)
  • File ID: 1613940 (Unknown size)
  • File ID: 1613938 (Unknown size)
  • File ID: 1613935 (Unknown size)
  • File ID: 1613944 (Unknown size)
  • File ID: 1613936 (Unknown size)
  • File ID: 1613939 (Unknown size)
  • File ID: 1613941 (Unknown size)
  • File ID: 1613946 (Unknown size)
  • File ID: 1613947 (Unknown size)
  • File ID: 1613949 (Unknown size)
  • File ID: 1613933 (Unknown size)
  • File ID: 1613930 (Unknown size)
  • File ID: 1613931 (Unknown size)
  • File ID: 1613945 (Unknown size)
  • File ID: 1613948 (Unknown size)

Description

This is an easy to build , easy to fly plane . I tried my best to make the design as simple and effective as possible. Its printed with a 0.3mm nozzle and a 0.2 mm layer height .I used esun PLA printed at 220 degrees with no part cooling fan for optimal layer adhesion. I used used Idea Maker to slice the files [pics of settings included] and I'm not sure if it will work on other slicer software or not. Remember to rotate all wings 45 degrees on the bed so that the leading edge is facing one of the corners of the print bed. this eliminates the salmon skin effect and makes for an over all better print. my instagram is ruan.debeer.908 if there are any other questions. 

Comments (1)

Sign in to leave a comment.

No comments yet. Be the first to comment!