Home > Designs > Gadgets > Q300L Q500L Coolermaster PC case mesh side panel extension

Q300L Q500L Coolermaster PC case mesh side panel extension

by Streetguru

$1.0

0 Likes

0 Downloads

1 Comments

Category: Gadgets

License: public_domain

Tags

Files Included:

File ID: 1617552 (Unknown size)
File ID: 1617553 (Unknown size)
File ID: 1617554 (Unknown size)
File ID: 1617551 (Unknown size)
File ID: 1617595 (Unknown size)
File ID: 1617593 (Unknown size)
File ID: 1617592 (Unknown size)
File ID: 1617589 (Unknown size)
File ID: 1617590 (Unknown size)
File ID: 1617591 (Unknown size)
File ID: 1617594 (Unknown size)
File ID: 1617587 (Unknown size)
File ID: 1617588 (Unknown size)
File ID: 1617611 (Unknown size)
File ID: 1617610 (Unknown size)
File ID: 1617615 (Unknown size)
File ID: 1617614 (Unknown size)
File ID: 1617613 (Unknown size)
File ID: 1617612 (Unknown size)
File ID: 1617600 (Unknown size)
File ID: 1617599 (Unknown size)
File ID: 1617609 (Unknown size)
File ID: 1617604 (Unknown size)
File ID: 1617605 (Unknown size)
File ID: 1617606 (Unknown size)
File ID: 1617607 (Unknown size)
File ID: 1617608 (Unknown size)
File ID: 1617601 (Unknown size)
File ID: 1617602 (Unknown size)
File ID: 1617603 (Unknown size)
File ID: 1617598 (Unknown size)
File ID: 1617597 (Unknown size)
File ID: 1617596 (Unknown size)
File ID: 1617563 (Unknown size)
File ID: 1617564 (Unknown size)
File ID: 1617567 (Unknown size)
File ID: 1617569 (Unknown size)
File ID: 1617568 (Unknown size)
File ID: 1617573 (Unknown size)
File ID: 1617574 (Unknown size)
File ID: 1617578 (Unknown size)
File ID: 1617579 (Unknown size)
File ID: 1617583 (Unknown size)
File ID: 1617585 (Unknown size)
File ID: 1617559 (Unknown size)
File ID: 1617546 (Unknown size)
File ID: 1617547 (Unknown size)
File ID: 1617556 (Unknown size)
File ID: 1617548 (Unknown size)
File ID: 1617557 (Unknown size)
File ID: 1617558 (Unknown size)
File ID: 1617549 (Unknown size)
File ID: 1617550 (Unknown size)
File ID: 1617545 (Unknown size)
File ID: 1617544 (Unknown size)
File ID: 1617540 (Unknown size)
File ID: 1617538 (Unknown size)
File ID: 1617539 (Unknown size)
File ID: 1617542 (Unknown size)
File ID: 1617543 (Unknown size)
File ID: 1617566 (Unknown size)
File ID: 1617576 (Unknown size)
File ID: 1617581 (Unknown size)
File ID: 1617586 (Unknown size)
File ID: 1617555 (Unknown size)
File ID: 1617562 (Unknown size)
File ID: 1617561 (Unknown size)
File ID: 1617565 (Unknown size)
File ID: 1617572 (Unknown size)
File ID: 1617575 (Unknown size)
File ID: 1617577 (Unknown size)
File ID: 1617580 (Unknown size)
File ID: 1617560 (Unknown size)
File ID: 1617582 (Unknown size)
File ID: 1617584 (Unknown size)

Description

The single piece model is available for free on Thingiverse https://www.thingiverse.com/thing:3877451 My CPU cooler was too big to fit with the side panel on, so I had to make an extended replacement.

The case also has some airflow issues and having a mesh side panel fixes that.

Lovely case otherwise.

zip file includes cut up models for 200mm printers and some documentation.

I think that pink PLA is just really low quality. The purple on the multiple piece unit came out fine. I had a lot of curling/warping as well so it might just be wet. I included narrower versions of the files as well which should be easier to print.

I used a raft for the 8 piece mesh models, used nothing for the 2 piece model. If you'd like to order a large 2 piece model just e-mail me at sdtech1993@gmail.com. As I have a CR10S5, though it's unlikely to be too cheap given the lengthily print times of 20+ total hours, and I'm sure you know if you have a 3D printer not to really expect perfection. I simply sanded them down with fine grit paper, and used super glue to attach everything together and clamped it for a while after. could probably use a superior gluing technique.

There's a bit of room around the I/O panel just for proper fit safety.

It was designed in Design Spark Mechanical, a free easy to use CAD suite, and the original design files are included for any further modification. Couldn't get the origin/orientation just right, might be a thing with that softward's save as feature. May need to 0/0/0 some files. And please avoid reuploading my models, you are free to do whatever with the finished prints. *I printed out the incorrect model for my 8 piece side panel. It's fixed in the final release, and the thickness of the mesh should be 1.25mm all around.

Comments (1)

No comments yet. Be the first to comment!

Q300L Q500L Coolermaster PC case mesh side panel extension

Description

Comments (1)

More from this category

Smart LCD Case Stand Alone version

SD Card Flash Drive Holder

Turbine Impeller

Apple Pencil with Smart Cover clips for iPad Pro

Flexible covid ear saver (13 to 24 cm long)

Arduino Pro Mini Holder