iPhone SE (2018) Case with Lanyard Compatibility

Description: --------------------

A minimal design to a 2018 iPhone 6 SE case but with the added eyelets for mini-carabiners or other lanyard system.

4 mm of infill around three sides of the phone provide a reasonable amount of impact protection and the bottom provides access for a lightning cable. Hollow cavities allow for minimal sound attenuation.

Note: initial prints, displayed, did not include headphone access.

Printing: -------------------- 

This print was accomplished with .5mm nozzle and .2mm layer height using 1.75mm TPU. I would recommend a smaller nozzle and layer height to increase adhesion for the top-most layers.

Supports: -------------------- 

Recommend minimizing supports to only the mute slider and the sound/lightning cavities.