I needed an extruder visualizer and I thought that a crank would fit nicely. You will need supports and my print settings in the prusa slicer were set to 0.15 (QUALITY), it takes about 15 min to print. I used a 7x4mm magnet, and it works really well, I think smaller magnets wont work as good. The maximum magnet size that will fit in the extruder hole is 8 mm I think. You will need to glue the magnet to the crank.
Loading prints...
EXTRUDER VISUALIZER - CRANK
1
like
0
collections
Tags:
Creative Commons Attribution-NoDerivatives
You can download, share, and use commercially, but you cannot change the material in any way or use it to make something new.
Licensed under CC BY-ND
Files Included
1 downloadable file:
Free download - login required
Downloaded: 24 times
Downloaded: 24 times
Loading comments...