A life size version of the humble Lasgun wielded by the Imperial Guard. Includes extendable stock, removable cartridge and separate mountable Bayonet.
Total length with extended stock and bayonet attached is 1045mm.
An exploded view is available to assist with assembly.
PLEASE READ THIS
I STRONGLY ADVISE printing the Grip Top and Grip Bottom first to scale it to your personal size. Current grip length is 106 mm. Current total length with the stock extended is 806mm. Bayonet should be scaled to the same as all other print files. Current Bayonet length is 302mm, with a 105mm Grip.
I recommend printing the like-numbered parts (1.1, 1.2 OR 3.1, 3.2 etc) together if possible, and then assembling them before printing anything else. This should help avoid any confusion as to what goes where. Also, to clarify, lowest numbers are at the front (Barrel end) of the model, higher numbers towards the back. I also recommend printing the Stock first, mainly for the reason below.
IMPORTANT: Core 5.1 and Core 5.2 MUST be fitted AROUND the Stock. If you fit these two Core parts together first, you will not be able to insert the completed Stock.
An exploded view to make assembly easier can be found here:
https://www.thingiverse.com/th...
PRINT LIST
- Print one of each file except for "Lasgun" "Lasgun Instructions" and "Bayonet", as these are for display only.
Please feel free to ask if you have any questions or require assistance.
Though designed from scratch by myself, this is a life-size recreation of a model that was designed by Games Workshop. All rights reserved.
Due to updates/changes, please download as of 17/03/2021.
Loading prints...
Lasgun (Life Size)
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...