EDIT: The 1.1 STL file has a slightly greater angle on the upper struts for thicker phones.
Phone stand with a good angle for phones, even with cover. Can be printed in both ABS and PLA
Be careful when printing in ABS, the corners have a tendency to warp.
I print with treelike support and and use gluestick when doing it in PLA, + Brim and heated bed when printing in ABS
ABS Temps: Extruder 230 C / 446F. Bed 100 C / 212 F
PLA Temps: Extruder 210 C / 410F. Bed 50 C / 112 F
A first layerheight of 0.27mm
avg layer height of 18.mm
Infill 15% with triangle or hexagonal shape infill.
Speed: 60mm/s print speed, and 80mm/s Travel Speed.¨
Phone is a Huawei P Smart Z 2019 for referance.
Loading prints...
Phone Stand
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Files Included
2 downloadable files:
Downloaded: 26 times
Loading comments...