The Tardigrade SD CARD Servant! A Water-Bear Servant to hold your Standard and Micro SD / SDHC CARDS!
There are 8 slots in total, 5 slots for standard size cards, and 3 slots for micro sized cards.
The slots blend seamlessly into the creases of the Bear's back.
The Bear also features an open snout, perfect for holding a thin pencil or stick!
And just like MAGIC, the SD cards and sticks on your desk are organized all in one place, all thanks to the help of a neat little Tardigrade friend!
If the Model Download Button isn't working, you may Download the Model on the Alternative Site in the link below, Thanks:
Please Download Here Instead if Download Isn't Working.
---------------------
Recommended Print Settings.
0.1mm Layer Resolution, 15% Infill, Skirt.
Please Note, that the Micro SD card slots were a pinch too small for housing the bottom base of the micro SD cards, however increasing the size of the model by around 2% should remedy that slight error. Thank you for your review and understanding. (:
Loading prints...
THE TARDIGRADE SD CARD SERVANT
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Loading comments...