This revolving 4-shot magazine for the .40 blowgun is a fun novelty for "tactical" blowgunners! It was designed around the .40 Spike (the short, thick blowgun dart). It is attached by installing the regular .40 blowgun into the wider end of the frame, while putting on the regular .40 blowgun mouth piece on the narrower side of the frame. To turn the cylinder, you must apply slight pressure onto the frame, thereby releasing the magazine catch (the extrusion in the inner frame locks into the groves of the cylinder chambers). The design was adjusted according to the print quality and deviations in dimensions of the printing service provider https://fdm-druckservice.de/ and may need further adjustment to comply with printer, filament and method used (as well as the blowgun itself).
Loading prints...
.40 Blowgun Revolving 4-Shot Magazine
Creative Commons Attribution-NonCommercial-NoDerivatives
You can download and share as long as you credit the creator, but you cannot change the material or use it for commercial purposes.
Licensed under CC BY-NC-ND
Loading comments...