I wanted something that was cheap on filament and quick to print- but could fit a phone up to a Galaxy Note 20 Ultra with a case on it.
Included are two different files.
1. Phone stand that is print in place. This has some vertical time, but no need for assembly, gluing, or sanding.
2. An assembly version of the original. Much faster (about 45% quicker) to print, and is easy for height-restricted printers, but requires glue and possibly some mild filing. Assembly is super easy and self explanatory.
Bonus: Tape pads integrated into design, so if you want to use double-sided tape or super glue the design down, you have more surface area without added bulk.
Phone angle will be 110 degrees. ---------------
Standard print setting. Nothing picky needed here, but possibly keep an eye on retraction if stringing occurs.
---------------If you like this original design, comment as a thank you.
Print on, lads!
Loading prints...
Minimalist Phone Stand
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...