Tested:
- on Ultimaker 2 Go.
- with PLA filament,
- on Cura slicer,
- layer height 0,15 mm (exept Duo_pupils.stl - 0,10 mm),
- infill 20%,
- scale 300 %. I recommend to print smaller parts like pupils and legs in sets of 5 so that the heat of the nozzle wont melt little elements. Concider printing them in 0.1 resolution as well.
Print Settings
Printer Brand: Ultimaker
Pinter: Ultimaker 2 Go
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.15 mm
Infill: 20 %
Filament: Orbi-Tech PLA green, white, orange, black
Notes:
Personally, after uploading STL's to Cura I scaled all parts by 300 % so the model size is optimal for me.
I recommend to print smaller parts like pupils and legs in sets of 5 so that the heat of the nozzle wont melt little elements.
Post-Printing
I put an effort to be sure all parts fit so You should be able to assemble the model without glue, like LEGO :D . Have fun !!!
... and don't forget to check out my social media:
Youtube https://www.youtube.com/watch?v=6Na8iMA\_yR8&list=PLBYTtsbPo-I9n1KRmHvNYp\_-bhwYlhzlc
Instagram https://www.instagram.com/3d\_challenger/
buy me a coffee https://www.buymeacoffee.com/3d\_challenger
Loading prints...
Duo owl from Duolingo App
Creative Commons Attribution-NonCommercial-NoDerivatives
You can download and share as long as you credit the creator, but you cannot change the material or use it for commercial purposes.
Licensed under CC BY-NC-ND
Loading comments...