Model of a wind turbine about 60 m in N scale (1/160).

The mast is printed in three parts with integrated centering marks.

The nose and the blade holder hub are drilled to allow the mounting of an axis. The cabin is in two parts to allow installation of a small engine, flashing led ...

The assembly of the elements is done with a few drops of cyano glue.

The base of blades can be slightly sanded to allow a finer adjustment on the hub, optional.

Intended for printing in a 20x20x18cm printing volume.

"Purchasing is temporarily disabled" here but it seems to last, so the model is also available on another site (search "stl files").

------------------------------

Print each blade with the leading edge on the bed with supports, diagonally if more space is needed.

Print pylon portions vertically.

-->> All parts are to be printed at 10% of their size in the stl file to obtain N scale.

Printing in 0.1mm to 0.16mm is recommended.