Dear Hookah Friend,

this Buddha Hooka gets printed in one hole part. So you can easily come to a wonderful smoking experience. You only need to put a stainless steel rod (37x14x2mm) through the hole at the top ended in the water on the bottom. At the top of the Buddha there is a gap to put a magnetic ring on for holding a metal plate. It is designed for a magnetic ring in the demension 27x21x3[mm].

You have to put a bullet like a glass sphere or a stainless steel bullet (7mm) in the base . You can also testing first a printed bullet if your printer is really accurately in printing round figures. I am printing the hole buddha hooker with a  .8 nozzle and a layer height of .25 . The result should be good enough, because of the good printing design. It allows you to hide the z-seam really well. With this settings you should have finished this Hookah in 20 hours.

If it's not capable for you to print waterproof bowls you can send me a message on my instagram account (CreateSmoke) for buying a printed hookah with a magnetic plate and black or white tupe.