This design is a more robust replacement to the original mounting for the rear mounted camera.

The original design is effectively a mounting plate with integral hollow peg into which a screw in used to attach it to the camera body. However, in use the peg separated from the mounting plate resulting in the camera falling off.

This redesign is a solid unit with screw hole simply unscrew the original and fit the replacement using the same screw.

Be sure to orientate it as per the original (see image), otherwise the clip will not engage and hold it in place.

Dimensions: 20 mm x 5 mm x 21 mm

Print settings:

Filament - SUNLU  PLA+ Grey

Orientation - Vertical

Layer height - 0.15 mm

Infill - 100%

Build Adhesion - Skirt

Weight - 2g

Print Time - ~26 mins