Da Vinci 1 3D Printer Extruder Carriage for MK8

Summary Please feel free to donate through PayPal to jeeplvr2000@yahoo.com and I will keep the designs coming Allows Da Vinci 1 user to adapt a complete MK8 extruder and hot end into the Da Vinci 1 3D printer. 

You will need fully machined hardened X-axis shafts if you use linear roller steel bearings instead of the brass Davinci bearings.

UPDATE 3/26/16 Belt grip can be glued into place with acetone if you print with ABS. I added three screws to secure the belt.

UPDATE 4/24/15 Added a carriage STL for usage of the original Da Vinci bushings

UPDATE 3/24/15 7:15 pst. Downloads after this time have the updated carriage for better heater clearance.

UPDATE: The hot end can be rotated to any direction to clear the carriage. Most MK8 hotends have an insulated barrier around the heater block also. Instructions Heater block can be rotated 90 dg for better carriage clearance. Round bearing hole is 15.4mm, half bearing hole is 15.2mm for better fitment of 15mm linear bearings.