Chris Call
@chris_call
I design 3D parts and models. Check out my Facebook page for more of my designs.
I am also a master mechanic, and machinist, computer repairman, and gamer.
Davinci 1 Right X axis carriage for 15mm x 8mm linear bearings
by chris_call
Finally an easy to print and accurate right Y axis carriage solution for the Davinci 1. This allo...
Davinci 1 left Y axis carriage for 15mm x 8mm linear bearings
by chris_call
Finally an easy to print and accurate left Y axis carriage solution for the Davinci 1. This allow...
Segmented Fan for 8mm Shaft
by chris_call
A segmented propeller assembly for 8mm shaft. Segmented parts can be printed on most 3D printers....
30mm to 50mm fan adapter
by chris_call
Fan adapter. Requires threaded holes for the 60mm side
UP Mini extruder wind barrier. Upgraded, similar to ver 11.9
by chris_call
Summary Fits in place of version 11.9 supplied by UP. Much better design, stronger shaft, bigger ...
UP Mini Extruder Platform
by chris_call
Summary Good fit. You will need a 3x.5 mm tap and a #40 (.098) drill to size the holes that need ...
UP Mini Mag Holder
by chris_call
Summary Added a retainer screw hole under the single linear bearing support. Now there is a retai...
Another universal spool holder.
by chris_call
Summary Please feel free to donate through Paypal to jeeplvr2000@yahoo.com and I will keep the de...
UP Mini mag platform modded
by chris_call
Summary Ever worry about the magnets not being strong enough to hold your extruder in place? Give...
UP Mini Extruder stepper platform and wind barrier modded for be
by chris_call
Summary Extruder stepper motor temperature taken after 1 hour of printing with all the covers off...
Dynamo Light (gravity chain drive or hand crank)
by chris_call
Summary Please feel free to donate through Paypal to jeeplvr2000@yahoo.com and I will keep the de...
UP Mini extruder gear cooling mod
by chris_call
Summary Complete redesign of the extruder plastic components to allow better cooling of the extru...