Summary Good fit. You will need a 3x.5 mm tap and a #40 (.098) drill to size the holes that need tapping. Be careful installing the wood screws. You may need to widen the wood screw holes slightly so they don't crack the ABS. Wood screws hold the wind barrier and the circuit board in place. Instructions Good fit. You will need a 3x.5 mm tap and a #40 (.098) drill to size the holes that need tapping. Be careful installing the wood screws. You may need to widen the wood screw holes slightly so they don't crack the ABS. Wood screws hold the wind barrier and the circuit board in place.
Loading prints...
UP Mini Extruder Platform
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Loading comments...