MakerTron-prinPLA-Kit2(Kit2)

It is motivated by CHAPPIE(Movie) and Syd Mead's Works(Maybe you do, too).

It is kit'2'. Kit1 is here. :-)

https://pinshape.com/items/11996-3d-printed-makert...

===========================

Kit2 is a simple model of the entry level.

But it has the ability to respond to various situations.

For example, It can be clean up the dog poop, light up the birthday candles and  etc... :-)

===========================

I like the traditional modeling methods that control vertex.

My models are optimized for 3D printing(especially FDM printers).

MY Print Slicer(Cura) Setting:

• Layer Height : 0.2mm
• Shell thickness : 1.2mm
• Bottom/Top thickness : 1.2mm
• Fill Density : 20%
• Print Speed : 50mm/s
• Support type : Everywhere
• Platform adhesion type : Raft

Filament Type : ABS(Natural)

The gap is optimized, but the polishing-processing or some bonding may be required, depending on your printings.

And I provide PICtart - Lithophane App(Android).^^ You can make your lithophane easily with PICtart.