Corribee 21 sailboat 3D model
The model is optimized for 3D printing to be printed in a very simple way and with almost no supports. It is a 100% functional model that can float in water, it simply requires the loading of some element such as sand or stones to give weight to the helmet.
The model contemplates making the sails from any fabric that you prefer, cutting them to size and then placing them with some inserts that the model has to be held, then using threads to position them as you wish. To position the sail, it has small locks on the hull that allow the sail to be held firmly. It is recommended to use hot silicone so that some elements are firmer when assembling the entire sailboat.
In total there are 10 STL, some must be printed several times since the same piece is repeated.
The last image shows what the filling should be like, in my case I used sand.
It does not require supports in most parts, only inside the cabin.
Update 05/20/24
exhibition stand
Loading prints...
Sailboat
Creative Commons Public Domain
The creator has waived all rights to the work. You can copy, modify, distribute and perform the work, even for commercial purposes, without asking permission.
Licensed under CC0
Files Included
10 downloadable files:
Loading comments...