Español:
Hola a todos! Les traigo este modelo de la base donde se instalan las camaras de la marca Ezviz. Este modelo consta de 2 piezas las cuales se la pieza 1_Base.... se imprime 1 sola vez, la pieza 2_Base... se debe de imprimir 3 veces.
Se arma mediante pegamento de cianocrilato.
Espero les sirva.
English:
Hello everyone! I bring you this model of the base where the Ezviz brand cameras are installed. This model consists of 2 pieces, part 1_Base... must be printed only once, part 2_Base... must be printed 3 times.
It is assembled using cyanoacrylate glue.
I hope it helps you.
-------------------------------------------------------------------------------------------------------------------------------------------------------
100% infill
Layer= 0.2mm
Nozzle= 0.4mm
Filaments= ABS, PETG, ASA,PLA.
Loading prints...
Base support for Ezviz cams
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Loading comments...