Summary
with this project i'll try to print most non printable reprap parts
Instructions
the structure will be like mendelmax http://mendelmax.com/tikiwiki/tiki-index.php?page=MendelMax
http://www.kickstarter.com/projects/openrail/openrail-open-source-linear-bearing-system
https://docs.google.com/spreadsheet/ccc?key=0Ao-fptzJAVfGdDdnd3htckhZUVdWUTdvRnJQUEJrMUE&hl=en_US#gid=0
the weight of single part 2x2x11cm is 20g with 3 perimeters and 80% infill and take about a our to complete (75mm/s)
with this settings the total weight of all plastic extrusion for mendelmax are 900g (about 17€)
for make a complete bar we need 3 pieces (60g of PLA) and 8 pins for joints
according to this https://docs.google.com/spreadsheet/ccc?key=0Ao-fptzJAVfGdDdnd3htckhZUVdWUTdvRnJQUEJrMUE&hl=en_US#gid=0 i have made different type of extrusions, 4x 105mm = 420mm extrusion and so on :)
Loading prints...
90% printed reprap
3
likes
0
collections
Tags:
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Loading comments...