Summary Girlfriend wanted something to use for traveling with smaller amounts of cosmetics. This is modeled after some of what she has laying around. Parts are threaded and have tolerances to fit (IIRC it was 0.50mm part to part and 0.25mm thread to thread, since the thread and body were toleranced at different points during modeling). Every print I've made requires a few turns in and out to "break in" the threads before use but once they work they work well. Instructions I kept the infill relatively low (15%) and used standard (2) shells, but I did print them with 0.15mm and 0.13mm layer heights to keep the inside surface as smooth as possible.