Summary This is the first of a complete Tudor Building that I designed for my Tudor village that is 00 scale ( 4mm to the foot, 1:76.2) model railways. Can be also used for HO scale, British themed but could be used elsewhere.

 This one is a small Pub or Tavern. The roof is made from cast plaster so is not included here and as is the base of the Chimney Parts list by wall

 LEFT WALL 

TT-500    x3 

TT-502   x1

 TT-504  x1

 TT-505 x1

 TT-506 x1 

TT-509 x1

 TT-517 x1 

TT-564 x2

 RIGHT WALL

 TT-500 x3

 TT-502 x1

 TT-503 x1

 TT-504 x1

 TT-505 x1 

TT-506 x1

 TT-509 x1 

TT-550 x1

 TT-564 x2

 FRONT WALL

 TT-503 x2

 TT-507 x2 

TT-508 x2 

TT-512 x1 

TT-517 x1 

TT-518 x1 BEAM

 TT-518 x13 SUPPORTS 

TT-538 x2 

BACK WALL 

TT-502 x1 

TT-503 x2 

TT-517 x4 

TT-527 x2 

TT-538 x2 

TT-564 x3 

DORMERS 

TT-578 x3 

CHIMNEYS 

CB-09 x4 

BARGE-BOARDS

BB-02-LEFT 1 LENGTH 

BB-02-RIGHT 1 LENGTH

RIDGE TILES 

RD-22 x2 

GUTTERING

RD-06 x2 

The down pipes are made from 0.75mm copper wire and the brackets from silver foil

 I shall prefix all the designs with SCALEPRINT so you can find them easily 

Print Settings Rafts: Doesn't Matter

Supports: Doesn't Matter

Resolution: 0.1mm to 0.2mm for Tudor Tiles

 Notes: 

With the Tudor tiles the largest nozzle i would recommend is a 0.4 I personally use a 0.2mm nozzle for my printing of these Tudor Tiles but have printed them with a 0.4 nozzle on my other printer. 

The Barge-Boards BB-02, Chimneys CB-09 and the Ridge Tiles RD-22 really need to be printed with a 0.2mm nozzle or the detail will not be printed you will just end up with an ugly mess a layer height of no more than 0.1mm should be used.