Summary Designed for the Mobius camers , and made to be a lot lighter than the metal gimbals. This is a revised version of my former gimbal It's more compact very rigid and has less weight. the electric parts are from a cannibalised Gimbal from China. The primary mount is designed to fit the gimbal controler as well a transmitter. Works very well and has been used for the last 4 months with no problems. The nylon screws holes for mounting the controler board need to be pre threaded with a metal 3mm screw first I have included 2 versions of the side arm to counter balance problems with some heavier brushless motors Print Settings Rafts: Doesn't MatterSupports: Doesn't MatterResolution: 0.2Infill: 50% Notes: Only some of the items needed suports. the rest were fine .. all printed fine without a raft. build plate 110c extruder 230c - 235c Post-Printing Hint !! 'HINT" I found if now and again you wipe the build platform with Acetone it gets rid of the grease build up and sticks far better...