Summary This is another of many models that I will be releasing here on Thingiverse that I have designed for 00 scale ( 4mm to the foot, 1:76.2) model railways. Can be also used for HO scale, the majority is British themed but could be used elsewhere. This one is of A water tower based on British design. Has all the parts that are printable. the brickwork is cast in plaster using the Linka mould system, these moulds plus others are available from http://www.linkaonline.co.uk/store/c3/Linka_Products.html You will notice on the site that a lot of the designs of components that I am publishing on Thingiverse are also available here as moulds for casting in plaster. Print Settings Printer: Ordbot Hardron and modified Flashforge and ToyRepRafts: Doesn't MatterSupports: Doesn't MatterResolution: 0.1mm to 0.2mm Notes: The largest nozzle i would recommend for the tank sections is a 0.4 I personally use a 0.2mm nozzle for most of my printing, but have printed them with a 0.4 nozzle on my other printer. The window and door parts are best done with a 0.2mm nozzle or the detail may not be printed properly.