SummaryThis is a printable motor mount for a carbon fibre tube that can be used on my printed quad or any other multi rotor. Choose from list of sizes. All sizes are outer diameter of CF tube. If you find this thing helpful a small donation is always appreciated! Donate Update 7/3/13: I've added the sketchup file for the motor mounts and the spacers. Update 5/12/13: This project kinda fell to the back burner for a bit. I have uploaded 8 new files for motor mounts. There are two styles, round and teardrop. There are also 4 different types depending on your needs. Unfortunately there is just the 9/16th diameter at the moment. Now that I have the designs finalized I will begin to add other common arm diameters. Stay tuned.InstructionsPrint at 100% infill for the "Clamp" style mount and use 6/32 hardware to secure to carbon fibre tube. Do not over tighten. The other mounts can be printed at 50%. You can either use a 6/32 as a set screw or a few drops of super glue.