SummaryThe LittleRP FlexiVat
For those with a filament printer, here a fully functional Flex Vat for LittleRP DLP.
Aditional Materials:
8pz. 1/8 x 1/2 STD screws.
4 pz. 1/8 x 1" STD screws
4 pz. 1/8 x 1" 1/2 STD screws to install on Little RP.
16pz 1/8 STD nuts.
FEP film from:
http://projectsinterestsandetcetera.com/store/#FEP-Film
2mm. EVA foam from any craft store or stationery.
Use a cutter to cut and shape EVA and FEP film.
Use a punch papper to make holes on EVA foam and FEP film.
More iformation on:
http://www.buildyourownsla.com/forum/viewtopic.php?f=19&t=4867
The LittleRP FlexiVat was inspired on the excellent work of HTL.
http://projectsinterestsandetcetera.com/Print SettingsPrinter: Da Vinci 1.0Rafts: NoSupports: NoResolution: 0.2 mmInfill: 50%Notes: Print with PLA DO NOT USE ABS.
For the upper vat container its very important to print with 4 shell thickness and 100% infill at slow velocity to ensure waterproof.
For the rest of parts, use 3 shell thickness and 30% infill at medium velocity.
Loading prints...
LittleRP PLA printable FlexiVat
1
like
1
collection
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...