SummaryHi All, i take inspiration by this great model: http://www.thingiverse.com/thing:16331 I just cut the head, subdivided it and applied some things as the base and corrected with MeshMixer the geometry. My Goal was to print it Hollow but the slicer (makerware) take too much hours to prepare.. the good is that Hollow this print is lighter, about 70-80 Gr. insted 120. InstructionsThis model have the support generated by MeshMixers.. so you don't need support to print it. Just a raft.. and 0.2mm layer size (the supports are made with this layer thickness). Enjoy ;)