This is a custom card guard for bicycle/tally ho and similar playing cards. If you use simplify 3d you can easy adjust it to fit any card case.
Watch the entire process below ;) https://www.youtube.com/watch?v=5QwwC2_XA-c
Printer: Rostock modified
Rafts: Doesn't Matter
Supports: No
Resolution: 0.3 mm recommended but can go lower if you wish
Infill: 10 - 20% or every layer 100% , it's up to you ;)
Notes:
This model was printed in ABS on 265 celsius for hotend and 110 for heatbed to make sure there would be no cracking in ABS. Make sure to print with a larger brim to avoid material curling on the bottom layer during print.
Loading prints...
Card Guard
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Files Included
1 downloadable file:
Downloaded: 178 times
Loading comments...